That’s odd. This is the first time that I hear about this problem.
CFUN=1 means switchting on the radio module.
Maybe a capacity or power issue on the device?
We do not have IMSI - IMEI lock configured. All our simcards should be able to work in mutiple devices. I double checked your sim-card configuration as well.
We do have some users who connected the nrf9160 via UDP…
@Sergey-Vladimirov thx for your enthusiasm!
For now only Quectel and Telit are “nuSIM - ready”. But soon more module vendors will be ready as well.
Check out: https://iotcreators.com/en/nusim/
PS. you also sent an e-mail with another question and we’re trying to get back to you but it looks like your inbox is not accepting new messages
If you’re one of the lucky ones who received a nuSIM dev-kit from my colleagues Mona Parsa and Stefan Kaliner, you’re at the right place to find out how to get this super cool dev-kit online without a plastic simcard!
STEP 1: GET YOUR STARTERKIT PROJECT
Before using the dev-kit, you’ll need a starterkit project environment.
STEP 2: GET YOUR DEV-KIT ONLINE
cdp.iot.t-mobile.nlas APN and
172.27.131.100as gateway for a ping test or to send your uplink messages
AT-COMMANDS TO ATTACH TO THE NETWORK
Switch-off the radio module
Configure basic connectivity parameters
AT+NCONFIG="AUTOCONNECT","TRUE" AT+NCONFIG="CR_0354_0338_SCRAMBLING","TRUE" AT+NCONFIG="CR_0859_SI_AVOID","TRUE"
Set the APN
Set the band
Select the Operator
Telekom Germany = 26201
T-Mobile Netherlands = 20416
T-Mobile Poland = 26002
Or use the PLMN ID of any other operator within our NB-IoT roaming footprint
Switch-on the radio module
After not more than 30 seconds, your device should be attached to the network.
Now you can proceed with registering the IMEI number of the module in your starterkit-project and send your
Hello World uplink message!
To follow the AT-commands below, it is important that you register the IMEI as UDP.
AT-COMMANDS TO SEND YOUR UPLINK
Open local UDP-socket
Send your uplink-message (2x)
Make sure to send it twice, in order to see your message in your starterkit project.
Feel free to reach out in case of any questions!
@Mert-Karabagli with simcards from iotcreators.com you can indeed only send your UDP traffic to our own Service Capability Server (172.27.131.100). In the portal you can specify your callback URL to collect the device data via webhook/throught http posts.
If you need a simcard with which you can send data directly to your own server, pls reach out to firstname.lastname@example.org and theyt can give you access to the ‘easy connect’ platform.
In the future we will also support this in the iotcreators portal but for now it is a separate solution.
Yes, but so far it is just a recommendation. On radio network layer nothing happens if you exceed it.
But I don’t know what happens on a higher layer with 1NCE simcards. Sorry
If the simcard comes from iotcreators.com, you just need to follow this instruction: https://docs.iotcreators.com/docs/integrations
But if you got the simcard directly from Telekom Deutschlan, I’ll have to ask a colleague.
Hi Timo. It depends. Where did you get your simcard? If you got it from iotcreators.com then, yes, there is a guideline of 120 messages per day max.
However, currently there are no technical limitations and no financial implications.
could you successfully register the callback URL of Beeceptor in your Project?
If you save your “Callback URL” in the portal it sends an empty POST to the URL and expects an 200 as response.
If no 200 is returned the URL is not stored and by this data message can not be forwareded.
Could you please send your account name and your EMEI to email@example.com ? I can verify if the message has been received.
Please don’t post those infos to the forum.
@rgb93 before april 2018 the Neul Messaging Protocol was a Huawei Ocean Connect propietary protocol.
But later the later on they made the source code available to us. We used the same source code to create the Neul Messaging Adapter in our Service Capability Server.
So if the error says that there is no connection to the Huawei platform, it simply means that there is no connection with our Neul Messaging adapter. Pls send me your IMEI number and group name (CON_00000xxx) by e-mail or DM and I will check it.
Can you provide me the ‘adaptationLayerName’?