Posts made by peter4838

@techniek

Hi Henk,
Here is my reply on your second message (it works now!!! :))
AT+CIMI => 901405700000513

AT+NUESTATS
Signal power:-969
Total power:-882
TX power:13
TX time:1503
RX time:57409
Cell ID:84505703
DL MCS:0
UL MCS:0
DCI MCS:2
ECL:0
SNR:119
EARFCN:3747
PCI:302

AT+NUESTATS=RADIO
NUESTATS:RADIO,Signal power:-969
NUESTATS:RADIO,Total power:-882
NUESTATS:RADIO,TX power:13
NUESTATS:RADIO,TX time:1503
NUESTATS:RADIO,RX time:57409
NUESTATS:RADIO,Cell ID:84505703
NUESTATS:RADIO,DL MCS:0
NUESTATS:RADIO,UL MCS:0
NUESTATS:RADIO,DCI MCS:2
NUESTATS:RADIO,ECL:0
NUESTATS:RADIO,SNR:119
NUESTATS:RADIO,EARFCN:3747
NUESTATS:RADIO,PCI:302

Thanks for your help!!!
Its working now

Kind regards,
Peter Bosma

@techniek
Hi Henk

I try to reply to your questions:

For Software version:
ATI9 => Error
AT+CGMI => Error
AT+CGMM => Neul Hi2110
AT+CGMR => V100R100C10B656

IMEI: +CGSN:358878080017376

AT+CFUN=1 => OK
AT+CCID => ERROR

Further info:
SIM card ICC:8988228000000005100
SODAQ board: SARA-N200 (02B-00)
Adruino Leonardo

Hi
I tried to connect the SODAQ / Leonardo combination to the T-Mobile network. For a few weeks now I try to connect to from my working place in Uitgeest to the network which is unsuccesful, the network signal strength is around 21.99 but the module will not connect to T-Mbole network.

I followed the exact descripted procedure in https://forum.iot.t-mobile.nl/topic/65/part-i-the-network-attach

When I do the exact same procedure nearby Schiphol, it connects straight away and I can send messages, however comming back to Uitgeest, it just will not connect to the network.

Can somebody look into the network and check that it works?
I’m happy to assist to do some testing…

Kind regards,
Peter Bosma